Skip to content
KP Cesspool Services
Service

Treatment Plant Servicing and Repairs in Kent and East Sussex

Scheduled maintenance plans, breakdown callouts and part replacement by qualified engineers who know these units inside out.

Engineer in orange protective overalls and gloves servicing the rotating biodisc inside a sewage treatment plant

A treatment plant is machinery

This is the part people miss. A septic tank just sits there, but a treatment plant has a blower or a motor, bearings and moving parts, and it runs every hour of every day. Left unserviced it will eventually stop treating, and the first sign is often a smell or a complaint from a neighbour downstream.

Most manufacturers want a service every six to twelve months. Skipping them can also void the warranty, which is an expensive way to save a small annual cost.

What a service covers

We check and clean the blower and its filter, inspect the biodisc or aerator and its bearings, check the motor and drive, look at the settlement and final chambers, and assess what is being discharged. Worn parts get replaced before they strand you, and you get a record of the visit for your files. What to expect from treatment plant servicing walks through a typical visit.

Desludging

A plant still collects sludge in its first chamber. The General Binding Rules say it must be removed before the plant reaches capacity, and that this should be at least once a year or as often as the manufacturer instructs. Some models need it more often than others, so we work to the manual for your unit and can empty it on the same visit as the service.

Service plans

Rather than relying on remembering, you can put the plant on a regular service. We book the next visit in line with the manufacturer's interval, usually every six or twelve months, and desludge on the same trip when it is due. It keeps the warranty intact, keeps the discharge clean and builds a record for when you sell.

Signs something is wrong

An alarm, a smell, a change in the noise the unit makes, a cloudy or grey outlet, or a supply that keeps tripping. Any of those is worth a call before it becomes a failure. Treatment plant faults and what they cost in Kent covers the common ones.

Breakdowns

If your plant has stopped, alarmed or started smelling, ring us. Many faults come down to a failed blower, a worn bearing or a tripped supply. If a part has to come in we will tell you what it is and how long it will take, rather than leaving you guessing. Out of hours, our 24 hour callouts cover it.

Your duty as the owner

Under the General Binding Rules, a plant has to be maintained by someone competent, in line with the manufacturer's instructions, and repaired or replaced if it is not in good working order. A plant that has stopped treating is still discharging, so the rules treat a neglected plant as a pollution risk. When you sell, you must pass the buyer a written description of the system and its maintenance records.

Every common make

We service Klargester BioDisc units and the other common makes across Kent and East Sussex. Klargester servicing in Kent covers those units in particular, treatment plant servicing in Battle and the High Weald shows what the work looks like on the Sussex side, and how long a treatment plant lasts explains what tends to wear first.

What you get

  • Scheduled maintenance plans
  • Breakdown and emergency repair
  • Klargester and every common make
01233 720725Request a callback

Covering both counties

We carry out treatment plant servicing & repairs right across Kent and East Sussex.

Need help with treatment plant servicing & repairs?

Ring us for a price, or drop us a message and we will get straight back to you. We are on call 24 hours a day, every day of the year.

01233 720725Landline07708 786366MobileEmail uskpcesspoolservices@hotmail.com
Open 24 hours7 days a week, all year
CBDU266860EA registered waste carrier
Call 01233 720725usGet a price